全自动加药装置的组成

加药装置由溶液罐、若干法兰、阀门等组成，配置计量泵。
计量泵为一备一用，这样方便用户在不停机的状态下进行检修、更换配件。
装置主要部件有：1、溶液罐 2、搅拌器 3、液位计 4、过滤器 5、安全阀 6、计量泵 7、缓冲器 8、球阀、止回阀、截止阀 9、压力表及相应管道等。

Summary of automatic dosing device：

The dosing device is composed of a solution tank, a number of flanges, valves, etc. Configure the metering pump The metering pump is one backup and one use, so that it is convenient for users to overhaul and replace parts without stopping the machine.
The main components of the device are: 1, solution tank 2, agitator 3, level gauge 4, filter 5, safety valve 6, metering pump 7, buffer 8, ball valve, check valve, stop valve 9, pressure gauge and corresponding Pipes and so on.

全自动加药装置的设备特点

1、可投加各种配比的水处理药剂，计量准确。
2、自动化程度高，操作简单，能耗低。
3、安装及使用，维修简单、方便。
4、 性强，耐强酸强碱。
5、 如用户需要，系统可远程控制，并入计算机管理系统。
6、 投资少，运行稳定。

Equipment characteristics of automatic dosing device

1.Water treatment chemicals of various proportions can be added, and the measurement is accurate.
2. High degree of automation, simple operation and low energy consumption.
3. Installation and use, maintenance is simple and convenient.
4. Strong performance, resistance to strong acid and alkali.
5. If the user needs, the system can be controlled remotely and integrated into the computer management system.
6. Low investment and stable operation.

全自动加药装置的应用范围

1、饮用水系统
2、空调冷冻、冷却循环水系统；
3、工业循环冷却水系统；
4、采暖循环水系统；
5、景观循环水系统；
6、泳池循环水系统；
7、各种工业废水及生活污水处理中的投药消毒。

The scope of application of the dosing device

1. Drinking water system
2. Air conditioning refrigeration and cooling circulating water system;
3. Industrial circulating cooling water system;
4. Heating circulating water system;
5. Landscape circulating water system;
6. Swimming pool circulating water system;
7. Dosing and disinfection in various industrial wastewater and domestic sewage treatment.

全自动加药装置的维护

加药装置的管路应随时保持畅通，定时不定时地对装置各连接部位、过滤器、进料口、出料口等进行检查，观察这些部位是否有沉积物质，如发现这些症状，应及时加以清理。
要定期检查计量泵进料口是否堵塞，对管线、过滤器定期清洗，以防堵塞。
定期检查搅拌装置，查看搅拌轴是否转动灵活，叶轮是否扭曲变形，联轴套是否松动，以免轴扭力过大，消耗搅拌功率，如有损坏应及时更换。
要定期对安全阀、压力表及各管线阀门进行检查，以免发生泄露事件。

Maintenance of automatic dosing device

The pipeline of the dosing device should be kept unblocked at all times, and the connection parts, filters, inlets, and outlets of the device should be inspected from time to time to observe whether there are deposits in these parts. If these symptoms are found, they should be timely To be cleaned up.
Regularly check whether the metering pump inlet is blocked, and clean the pipeline and filter regularly to prevent blockage.
Check the stirring device regularly to check whether the stirring shaft rotates flexibly, whether the impeller is twisted or deformed, and whether the coupling sleeve is loose, so as to avoid excessive shaft torque and consumption of stirring power. If damaged, it should be replaced in time.
Check the safety valves, pressure gauges and pipeline valves regularly to avoid leakage。