钢衬塑储罐/Definition of steel-lined plas tic s torage tank :
用可滚塑的塑料（线性低密度聚乙烯LLDPE）为主材质做成的内塑外钢储罐制成的衬里储罐。是一种复合型储罐。
The lining storage tank is made of inner plastic outer steel storage tank made of rotomoldable plastic (linear low-density polyethylene LLDPE) as the main material. It is a composite storage tank.

钢衬塑储罐特点/Features of steel-lined plastic storage tank:
1、钢衬PE 储罐为滚塑储罐，没有接缝，一体成型，使用寿命长；
2、钢衬塑材质特别耐强酸腐蚀，因此是装强酸的选择材质，其次为强碱、盐类、有机物、氧化物、还原物等；
3、强度好，比全塑料储罐强度好，可以装比重大的溶液；
4、钢衬塑耐酸，对强酸几乎无腐蚀，使用寿命更长；
5、耐温性较好，钢衬聚丙烯储罐、钢衬聚乙烯储罐都耐温都好于全塑储罐；
6、钢衬塑储罐，电阻值高，装高阻有机溶煤时，要防静电和除氧。
1. The steel-lined PE storage tank is a rotomolding tank with no joints, one-piece molding, and long service life;
2. The steel-lined plastic material is particularly resistant to strong acid corrosion, so it is the material of choice for strong acid, followed by strong alkalis, salts, organics, oxides, reductions, etc.;
3. Good strength, stronger than all-plastic storage tanks, and can be filled with solutions with a large specific gravity;
4. The steel-lined plastic is acid-resistant, almost non-corrosive to strong acids, and has a longer service life;
5. Good temperature resistance, steel-lined polypropylene storage tanks and steel-lined polyethylene storage tanks are better than allplastic storage tanks in temperature resistance;
6. Steel-lined plastic storage tank, high resistance value, anti-static and deoxygenation when installing high-resistance organic solvent.

钢衬塑储罐用途/Steel-lined plastic storage tank use:

• 特别适合储无机酸（盐酸、硫酸、磷酸等）；
• 无机盐类；
• 有机酸（甲酸、醋酸、乳酸、柠檬酸、苹果酸等），还可以装无机碱类（烧碱、液碱）；
• 有机溶煤（甲醇、乙醇、乙醛、烃类、油类）；
• 有机化合物

Especially suitable for storing inorganic acids (hydrochloric acid, sulfuric acid, phosphoric acid, etc.);

• Inorganic salts;
• Organic acids (formic acid, acetic acid, lactic acid, citric acid, malic acid, etc.), and inorganic alkalis (caustic soda, liquid caustic soda)
• can also be installed;
• Organic solvents (methanol, ethanol, acetaldehyde, hydrocarbons, oils);
• Organic compound